News:

Zatikon is back and free to play! https://www.chroniclogic.com/zatikon.htm

Main Menu

Gish Editor

Started by c-b, October 05, 2004, 10:02:25 AM

Previous topic - Next topic

Chronic Logic - Alex

Most of the story mode stuff is hardcoded right now because I didn't have time to write a scenario editor.  I will write one soon, once someone makes enough good levels for it to be worth it :-)

Jonathan_NL

Thanks for noticing the RGB values. Should be 100,2,10.

If objects have less mass they stretch more.
I rarely check this forum anymore. Feel free to send me a PM if you want my attention.

Jonathan_NL

Then you can reinstall at a different location, copy SDL.DLL over to the old location and remove the rest.
I rarely check this forum anymore. Feel free to send me a PM if you want my attention.

Jonathan_NL

You heard that people? http://www.pontifex2.com/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

K = show only current layer
678 = warp rects
shift-5678 = darker rects http://www.pontifex2.com/iB_html/non-cgi/emoticons/rock.gif" border="0" valign="absmiddle" alt='???'>
I rarely check this forum anymore. Feel free to send me a PM if you want my attention.

Jonathan_NL

Bug: some lights don't show up when zoomed out (try cave1).

Edit: might be a limit on the number of lights.

Edit again: limited to 8. Sorry, no bug.
I rarely check this forum anymore. Feel free to send me a PM if you want my attention.

rammerizkool

ok, now im being stupid.  how would i reinstall it?  if i uninstall it, wouldnt it delete all the files for gish?  i dont have a CD of it, i got the download of it.
Friendship is like wetting your pants, everyone can see it, but only you can feel its warmth.

budgiedood

Hi, I'm getting the hang of it now, took me ages to work out to press F5 to make it all work  http://www.pontifex2.com/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> .

Just one question, is there any way of making tumbling blocks kill gish even if he is heavy?

If not, how do I make spikes?

Thanks
Oli

DonutGuyX

Bug: Editor crashes if you try to place more than 255 objects in one level. Large levels might need a lot of objects. http://www.pontifex2.com/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

Jonathan_NL

You don't have to uninstall - just install at a different location (I think the installer can?). You can http://www.chroniclogic.com/gish/gishdownload.htm" target="_blank">re-download the installer if you have deleted it.
I rarely check this forum anymore. Feel free to send me a PM if you want my attention.

Jonathan_NL

Exception:  EXC_BAD_ACCESS (0x0001)
Codes:      KERN_INVALID_ADDRESS (0x0001) at 0x7e8b7e10

(as expected)

A byte designating the type (char or short - not int, long long, float, double or anything else you can think of) somewhere at the start and a check should help.

Annoying: when gish is a light source, he has a little dot (reflection) in the middle.
I rarely check this forum anymore. Feel free to send me a PM if you want my attention.

rammerizkool

it says its been downloaded too many times.  the only person to dl it after me was my brother, and he had to have his computer ghosted afterwards.
Friendship is like wetting your pants, everyone can see it, but only you can feel its warmth.

budgiedood

Has anyone else been annoyed when you test out a level and die, which makes it exit the editor? Especially when you haven't saved  http://www.pontifex2.com/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('>

rammerizkool

LOL http://www.pontifex2.com/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> oops!  i just realized that i installed gish to a different directory, LOL.  god im stupid.    there was another gish thing.  omg.  thanks though, guys.  geez im an idiot  http://www.pontifex2.com/iB_html/non-cgi/emoticons/laugh.gif" border="0" valign="absmiddle" alt=':laugh:'>
Friendship is like wetting your pants, everyone can see it, but only you can feel its warmth.

Jonathan_NL

No you're not. http://www.pontifex2.com/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

I noticed that pistons move a little bit less than you ask them to. For example, if I printf the result of some double calculations I get 5.935509, rounded up to 5.94 (can't fit more precise in the textbox), but the piston only comes close (about 0.06 tiles) to its supposed destination. The minor impact of gravity would only help it come closer to the destination.

5.94+0.06==6.0, and looking closely that actually seems to happen... not really accurate. I guess this has to do with the my platform problem? (scroll up a bit)
I rarely check this forum anymore. Feel free to send me a PM if you want my attention.

viljettv

help

how comes the objects i place (with the F3 editor) dont have a texture?
they are just invisible, but they drop shadows.

i've put all the tile0? folders and gished in my gish folder.

its the linux version.

[edit] yes, i've tried to change the texture with '[' and ']' but nothing happens (it's a bit tricky to figure out the keys, when you don't have an us keyboard http://www.pontifex2.com/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=':;):'>)