Bridge replicas

after reading this thread, I attempted to make a replica of the Sydney Harbour Bridge.

Its the bridge that had the fire works all over it in the opening of the Sydney 2000 Olympics.

I had all the greatest of intentions, I carefully sculpted the landscape, I then spent ages building its complex design (working from photos).

The resulting bridge fell to the seabed like a sack of spuds!  I lightened it up a bit and re-inforced it but it still broke 60 links and only JUST supported a single carriage.

I won't bother posting it, however, if anyone else wants to take a shot at this one, feel free...

[VRBones]

As an exercise in level design, I attempted to build a level to replicate the Firth of Forth crossing. Here's a http://vrworld.qgl.org/pics/firthofforth.JPG" target="_blank">somewhat weak attempt to build a replica. Anyone else try to make replica bridges ?

[beaujob]

Ataturk Bridge in Istanbul, which spans the Bosphorus.

[beaujob]

Well, as you can see, it's got a lot of extra cabling that isn't in the real bridge to provide enough strength at the initial moment of bridge flop.

[beaujob]

I made the Sears Tower, and unlike some towers, it stands up quite nicely in Pontifex.

[mendel]

Holland Style Drawbridge

http://www.pontifex.mendelsohn.de/forum/drawbrg.pxl" target="_blank">[IMG]http://www.pontifex.mendelsohn.de/forum....brg.pxl

Be sure to set Difficulty to Medium, and run a 1 car train after the bridge is fully raised.

[baggio]

Sear's tower is more like 9 buildings held together.  There are 8 of varying height, surounding the core, or heighest part.

[Andy24]

I  am glad that people tried to recreate bridges in pontifex.

did the model of the atturk bridge run into any problemns due to the lack of pretensioned cables?